Site Management
Ongoing management after application
After supply, we keep monitoring each customer's process conditions and usage data, and optimise consumption, dosing conditions and change intervals. This supports stable use of the product, cuts unnecessary waste of resources and operating cost, and raises the productivity of the manufacturing infrastructure.

- 34%
Manufacturers visited by supplier engineers
- 43%
Machine failures from lubrication errors
- 11%
Fortune 500 revenue lost to downtime
Control criteria
We look at your KPIs with the product type and operating conditions, and set control items and limit values for each customer, such as consumption, dosing conditions and change intervals. Every later check and adjustment starts from these criteria.
Anomaly checks
Every 48 hours on average, we check the readings and usage received from site against the set criteria, looking for anomalies, out-of-limit values and the direction of the trend. When something is out of limits, we analyse the cause from the data and redesign the solution.
Condition tuning
We first simulate the redesigned solution and compare the results, then choose the conditions that suit the process best and present them to you. Where the conditions alone don't close the issue and further work is needed on site, we visit to confirm that the result meets the criteria.
Record keeping
After each adjustment we keep recording process data, actions and their results, and keep monitoring the state of the process. The record stays in each customer's history, shows whether the same problem returns, and grounds each later revision of the control criteria.
Four essentials of site management
Control points matched to the product
Each product has its own values to watch: viscosity and contamination for lubricants, concentration for cleaners, cure time for adhesives. We record the ones that suit what you use.
Trends against a baseline
Readings and consumption are tracked as trends against an agreed baseline. If a value moves outside it, we tell you as soon as we see it.
Action plans with the adjustments
We go past the alert, work out the cause and draft an action plan with the adjustments, such as dosing or change-out timing. Once our engineer approves it, it goes to site.
Records that build up by site
Proposals, test reports, action records and monthly reports are kept site by site. That record grounds the next decision at the same site.
FAQ
Who sets the control criteria, and how?
After supply, we set them together from your KPIs, the product type and your operating conditions. Control items and limit values such as consumption, dosing conditions and change intervals are set for each customer.
Which values do you manage?
Each product has its own values to watch: viscosity and contamination for lubricants, concentration for cleaners, cure time for adhesives. We choose the items that suit what you use, and record consumption and change intervals as well.
How often do you check?
We check the readings and usage received from site every 48 hours on average. We compare them with the criteria to find values out of limits, and follow the direction of the trend.
How do we send you our readings?
Readings are usually exchanged through Kaltec's own system, and our engineer may also collect them on a site visit or by phone. Choose the method that suits your site.
What happens when a value goes out of limits?
We tell you as soon as we see it. We analyse the cause from the data and draft an action plan with the adjustments, such as dosing or change-out timing. Once our engineer approves it, it goes to site.
Do you come to the site to check?
We visit when adjusted conditions alone don't resolve the issue and work is needed on site, and confirm on the visit that the result meets the criteria. Before we propose conditions, we compare the outcomes by simulation first.
How are management records kept?
Proposals, test reports, action records and monthly reports are kept site by site. The record shows whether the same problem returns and grounds each later revision of the control criteria.
Does site management cost extra?
Site management carries no separate charge. Checks and reports follow set criteria and intervals, which we adjust flexibly to the situation on site.
Product and site consultation
Leave your company, site and the product groups in use. Our engineer will get in touch to go through your site conditions and concerns. Materials, equipment, operating conditions and downstream steps show what should change and what can stay. If nothing needs to change, we will say so.
Contact us- 01Register
You fill in your company, site and the product groups in use.
- 02Call back
Our engineer calls to go through site conditions and concerns.
- 03Site database
Materials, equipment, operating conditions, products in use and past problems are recorded per site.
- 04Proposal and quotation
You get a proposal and trial plan that compare brands by composition and working principle.
- 05Purchase, delivery, application
The confirmed product reaches your site when needed, and we check the initial condition together.
- 06Usage management
Consumption and change intervals are checked and adjusted, and the results go into the site database.
