KALTEC

From cutting hard alloys to 24 months at sea

Precision machining of airframe and engine components.

Aerospace

What is aerospace parts manufacturing?

Aerospace parts manufacturing machines the components that go into engines, airframe structures, landing gear and hydraulic and fuel systems. It works with hard-to-cut materials such as titanium and nickel alloys while holding dimensions and surfaces within specification, and it continues through chemical milling, cleaning, shot peening, surface treatment and sealant application. The chemistry changes at every stage: cutting and forming lubrication, degreasing and cleaning, surface treatment chemicals, bonding and sealing, and corrosion protection.

In aerospace, problems show up late. Residue left after cleaning is invisible at the time, then appears as poor sealant adhesion or stains in surface treatment. If corrosion protection falls short, surface corrosion is found months later in the customer's warehouse. Fixing it means going back through processes that are already done. That is why we look not only at how a chemical performs but at what it leaves for the next process, and whether those conditions can be recorded.

Changing a material is not a one-step job either. It has to be on the airframe maker's approved list before it can be used, and in Nadcap-accredited stages such as shot peening and surface treatment, a change of chemical means reviewing whether accreditation can be kept. A data sheet alone does not win adoption; a track record of trouble-free supply under the same conditions has to build up. It is usually faster to plan a path that starts with small trial deliveries and increases volume in steps.

  1. 01

    Material inspection and storage

    Inconel, titanium, aluminum and other materials are received and stored until machining. Humidity and contamination can cause corrosion or discoloration. Choose a rust preventive by material compatibility, storage time and later processes.

  2. 02

    Rough machining

    The first cutting stage, where CNC machines remove bulk stock from hard-to-cut materials such as Inconel and titanium. Heat at the tool tip wears tools fast and the coolant spoils early. Choose a cutting fluid by cooling and lubrication balance and fluid life.

  3. 03

    Finish machining

    Precision cutting brings roughed parts to final dimensions and surface roughness. Micro burrs or uneven finish lead to rework. Choose a cutting fluid by surface quality, mist generation and washability after machining.

  4. 04

    Chemical milling for weight reduction

    Thin sections of aluminum and titanium are selectively dissolved in alkaline or acid etchant to make the structure lighter. Uneven etching or peeling maskant causes thickness variation and corrosion. Choose chemicals by uniformity, maskant compatibility and waste treatment.

  5. 05

    Cleaning and degreasing

    Oil, fine chips and leftover etchant are removed from surfaces after cutting and chemical milling. Poor cleaning breaks down coating adhesion, and aggressive cleaning can damage the surface. Choose a cleaner by cleaning power, compatibility and residue after rinsing.

  6. 06

    Shot peening for surface strengthening

    Metal media is blasted at high speed to put compressive residual stress into the part surface and extend fatigue life. The fresh surface has no protective film and oxidizes quickly. Choose post-treatment products by corrosion protection and compatibility with the next process.

  7. 07

    Anodizing and Alodine surface treatment

    Anodizing forms an oxide film, or chemical conversion coating adds corrosion resistance. Poor pretreatment or uneven film leads to discoloration and white rust. Choose chemicals by film properties, paint adhesion and approved specifications.

  8. 08

    Sealant and primer application

    Sealant and primer are applied to fuel tank joints and structural seams to seal them and form a corrosion barrier. Uneven thickness leads to leaks and joint corrosion. Choose a sealant by sealing performance, cure time and resistance to fuel.

  9. 09

    Non-destructive penetrant testing

    Fluorescent or dye penetrant and developer reveal defects such as surface cracks. Poor pre-cleaning or leftover penetrant leads to false indications. Choose chemicals by detection sensitivity, ease of removal and the approved procedure.

  10. 10

    Corrosion protection and packing

    Inspected parts are given corrosion protection and packed for long storage and transport. Vibration and humidity changes in transit can restart corrosion. Choose rust preventives and packaging by protection period, packing method and the customer's packaging specification.

  11. 11

    Shipping and customer storage

    Finished parts are shipped to the customer and stored until final assembly. Salt and condensation at sea can cause white rust. Choose long-term rust preventives by protection period and performance in salt environments.

Regulation and certification

FAQ

Tools wear fast on Inconel and titanium. Will changing the cutting fluid help?

It may not be the cutting fluid alone. These materials do not shed heat well, so cutting heat concentrates at the tool tip, and what needs fixing differs depending on whether cooling or lubrication is short. Generally, cooling is the more likely cause in high-speed ranges and lubrication in low-speed, high-load ranges.

Looking at the wear pattern narrows it down. Heat discoloration or cratering on the cutting edge points to cooling first; a rounded edge or built-up edge points to lubrication first. In some cases the same fluid improves results once concentration and nozzle position are corrected.

Stored machined parts keep getting white rust. Is a new rust preventive enough?

Changing the rust preventive sometimes helps, but if it keeps recurring, it is better to look at the cleaning stage before it as well. If the protective film goes over leftover oil or salt, corrosion can continue underneath. A thicker film only delays the problem when the cause is underneath.

Storage conditions matter too. The same rust preventive lasts different lengths of time in open storage and in sealed packaging, and VCI packaging is designed to work when sealed. Sometimes it is judged ineffective while the package is being left open.

Sea transport takes 6 to 24 months. How are parts protected during that time?

Salt and condensation act together, so rust preventive oil alone often cannot cover the period. A common setup combines VCI packaging with rust preventive wax and, depending on part shape, foam inserts or emitters. In many cases the real cause is condensation from temperature swings inside the container.

It is best to decide whether the protection must be removed after opening at the same time as the protection period. For parts where a cleaning step before assembly is hard to add, the choice narrows to products that need no removal. Confirming this later can mean redoing the packaging specification.

We want to replace a product we use now. Is there an approval process?

Only chemicals listed in the airframe maker's material specifications can touch the parts. Boeing runs BMS and Airbus runs AIMS, with SAE AMS referenced as a common standard. The three systems are independent, so approval in one is not automatically accepted in another.

On top of this sits the supplier's AS9100D system, so changing a listed specification goes through a separate procedure. That is why in aerospace, a product review often starts by checking which specification applies before looking at performance.